Pascal Audio T-Pro2 Amplifier Module

230,00

Solid State Audio Equipment are the first to offer Pascal Audio T-Pro2 Amplifier Modules in “Kit Form” aimed for the DIY Audio enthusiast.

2 in stock

Description

*NOTE – Purchase of the “Solid State Audio Equipment” GSJ Solid Aluminium Amplifier Chassis is required.

*INSTRUCTIONS – Choose an Amplifier Chassis, “Add to cart”, afterwards all Pascal Products can also be added.

Solid State Audio Equipment are proud to offer an ultra-compact Class-D amplifier module. This T-PRO2 can be used for 1 and 2-way applications , featuring direct drive, dynamic power ratings and integrated power supply with PFC.

Combining both the GSJ amplifier chassis with Pascal Audio T-Pro Series, is optimized for ultra compact high SPL integrated power applications – including asymmetrically rated two-way power channels

This combination requires minimal soldering, and can be customise for your individual audio needs, be it for; HiFi, home cinema or multi-channelled applications.

Specifications:

Power Ratings (RMS @ 1% THD @ 230Vac)

16 Ω

8 Ω

4 Ω

2 Ω

Channel 1

120 W

250 W

500 W

Load stable

Channel 2

120 W

150 W

75 W

Load stable

 

  • Output Circuitry – UMAC™ Class D – full bandwith PWM modulator with ultra low distortion
  • Output Voltage – 70 Vp / 140 Vpp (unloaded)
  • Amplifier Gain – 26 dB
  • Signal To Noise-Ratio – > 120 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load)
  • THD+N (typical) – < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power)
  • Frequency Response – 20 Hz – 20 kHz (+0/-0.25 dB (8 Ω load, 3 dB below rated power)
  • Damping Factor – > 500 (8 Ω load, 1 kHz and below)
  • Protection Circuits – Short circuit protection, DC protection, under voltage protection, temperature protection, overload protection
  • Power Supply – UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and integral standby converter
  • Operation Voltage – Universal Mains, 85-265V
  • SMPS RMS power limit – 1500 W (230VAC / 120VAC ) 1300W (100VAC)
  • Aux. Power for DSP – ±15 V, +7.5 V, maximum total 9 watt available
  • Standby Consumption – < 0.25 W (Green Energy Star & ErP 1275/2008/EC compliant)

Instructions:

Click the link & scroll to the bottom for a complete video guide for installation/assembly instructions.

Application manuals are sent electronically after Purchase.

Reviews

There are no reviews yet.

Be the first to review “Pascal Audio T-Pro2 Amplifier Module”

Your email address will not be published. Required fields are marked *

You may also like…