Pascal Audio L-Pro2S Amplifier Module

515,00

Solid State Audio Equipment are the first to offer Pascal Audio L-Pro2HP Amplifier Modules in “Kit Form” aimed for the DIY Audio enthusiast.

2 in stock

Description

*NOTE – Purchase of the “Solid State Audio Equipment” GSJ Solid Aluminium Amplifier Chassis is required.

*INSTRUCTIONS – Choose an Amplifier Chassis, “Add to cart”, afterwards all Pascal Products can also be added.

We’re proud to offer an ultra-compact Class-D amplifier module. The L-PRO2S is for powered speakers and 100/70V line applications, featuring direct drive, dynamic power ratings and integrated power supply with PFC.

However it doesn’t end there, combining both the GSJ amplifier chassis with Pascal Audio Module(s), which is one of the worlds smallest 1500W RMS, could be the best way to achieve a high-end HiFi system at lower price point.

This combination requires minimal soldering, and can be customise for your individual audio needs, be it for; HiFi, home cinema or PA usage.

Specifications:

Power Ratings (RMS @ 1% THD @ 120VAC and 230VAC)

100/70 V

8 Ω

4 Ω

2.7 Ω

Output power per channel

N/A

2x 400 W

2 x 800 W

2 x 1200 W

Output power bridge mode

1500 W / TBD

1500 W

2500 W

N/A

 

  • Output Circuitry – UMAC™ Class D – full bandwidth PWM modulator with ultra low distortion
  • Output Voltage – 85 Vp / 170 Vpp (unloaded) / Bridged 170 Vp / 340 Vpp (unloaded)
  • Amplifier Gain – 28.2 dB / 34.2 dB bridge mode
  • Signal To Noise-Ratio – > 119 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load)
  • THD+N (typical) – < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power)
  • Frequency Response – 20 Hz – 20 kHz (+0/-0.25 dB (8 Ω load, 3 dB below rated power)
  • Damping Factor – > >350, each channel (8 Ω load, 1 kHz and below)
  • Protection Circuits – Short circuit protection, DC protection, under voltage protection, temperature protection, overload protection
  • Power Supply – UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and integral standby converter
  • Operation Voltage – Universal Mains, 85-265V
  • SMPS RMS power limit – 1500 W (230VAC / 120VAC ) 1300W (100VAC)
  • Aux. Power for DSP – ±15 V, +7.5 V, maximum total watt available: L-PRO2S: 8.3 W
  • Standby Consumption – < 0.25 W (Green Energy Star & ErP 1275/2008/EC compliant)

Instructions:

Click the link & scroll to the bottom for a complete video guide for installation/assembly instructions.

Application manuals are sent electronically after Purchase.

Reviews

There are no reviews yet.

Be the first to review “Pascal Audio L-Pro2S Amplifier Module”

Your email address will not be published. Required fields are marked *

You may also like…