Pascal Audio L-PRO2HP Amplifier module

565,00

Solid State Audio Equipment are the first to offer Pascal Audio L-Pro2HP Amplifier Modules in “Kit Form” aimed for the DIY Audio enthusiast.

Out of stock

Description

*NOTE – Purchase of the “Solid State Audio Equipment” GSJ Solid Aluminium Amplifier Chassis is required.

*INSTRUCTIONS – As soon as an Amplifier Chassis has been “Add to cart” then any Pascal Products can also be added thereafter.

Solid State Audio Equipment are proud to offer an ultra-compact Class-D amplifier module. This L-PRO2HP is for a 2-way applications and subwoofers, featuring extreme dynamic power ratings and integrated power supply with PFC.

Combining both the GSJ amplifier chassis with Pascal Audio Module could be the best way to achieve a high-end HiFi system at lower price point. Its easy to assemble with minimal soldering, which you can customise for your individual audio needs.

Specifications:

Power Ratings (RMS @ 1% THD @ 230Vac)

16 Ω

8 Ω

4 Ω

Channel 1

800 W

1500 W

2500 W

Channel 2

200 W

400 W

400 W

 

 

  • Output Circuitry – UMAC™ Class D – full bandwidth PWM modulator with ultra low distortion
  • Output Voltage – 85 Vp / 170 Vpp (unloaded)
  • Amplifier Gain – 28.2 dB
  • Signal To Noise-Ratio – > 119 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load)
  • THD+N (typical) – < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power)
  • Frequency Response – 20 Hz – 20 kHz (+0/-0.25 dB (8 Ω load, 3 dB below rated power)
  • Damping Factor – > 350, channel 1 / > 225, channel 2 (8 Ω load, 1 kHz and below)
  • Protection Circuits – Short circuit protection, DC protection, under voltage protection, temperature protection, overload protection
  • Power Supply – UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and integral standby converter
  • Operation Voltage – Universal Mains, 85-265V
  • SMPS RMS power limit – 1200 W (230VAC / 120VAC / 100VAC)
  • Aux. Power for DSP – ±15 V, +7.5 V, maximum total watt available: L-PRO2HP: 7.5 W
  • Standby Consumption – < 0.25 W (Green Energy Star & ErP 1275/2008/EC compliant)

Instructions:

Click the link & scroll to the bottom for a complete video guide for installation/assembly instructions.

Reviews

There are no reviews yet.

Be the first to review “Pascal Audio L-PRO2HP Amplifier module”

Your email address will not be published. Required fields are marked *

You may also like…